Debug mode can be succesfully enabled on Samsung GX-1S with firmware 1.02.
Unfortunately, there is no debug menu like on newer cameras.
The same procedure will probably work on all *ist and GX1 cameras.
Only the MODSET and AUTORUN extensions may differ.
1. Format SD card in camera (I tested 16MB and 128MB)
2. Create file MODSET.TXT in root of SD with desired testmode (only one option at time)
3. Insert SD card in camera - DON'T CLOSE SD CARD DOORS!
4. Turn On camera and wait few seconds
modset filename: MODSET.TXT
scripting filename: AUTORUN.375
Works only in [DEBUG_MODE DIS]:
[AF_PINT_DISP]
[DSP_ROM_STORE]
[CPU_ROM_STORE]
[EEPROM_STORE]
[EEPROM_LOAD]
[LENS_COMUNICATION_CHECK]
[RELEASE_AGING]
[SWITCH_TEST]
[PRODUCT_NUMBER_DISP]
Enable/disable scripting
[SCRIPT_EN_MODE DIS]
[SCRIPT_EN_MODE EN]
Enable/disable camera operation with SD card doors opened - usefull for testing:
[CFDOOR_OPEN DIS]
[CFDOOR_OPEN EN]
Enable/disable debug mode
[DEBUG_MODE DIS]
[DEBUG_MODE EN]
Works only in [DEBUG_MODE EN]:
[DEBUG_DSC_DISP_OSTIME_INFO] - displays internal camera clock. [DEBUG_DSC_DISP_DSP_STATE_INFO] - dsp info, you should take a picture. [DEBUG_DSC_DISP_VENDOR_INFO] - same as DSP_STATE_INFO?
[DEBUG_DSC_DISP_BVAD_INFO] - same as DSP_STATE_INFO?
[DEBUG_DSC_DISP_DEBUG_INFO] - some debug numbers [DEBUG_DSC_DISP_BATT_INFO] - same as DSP_STATE_INFO?
[DEBUG_DSC_DISP_BVD_INFO] - some hex-values - probably exposition. [DEBUG_DSC_DISP_LVDDASH_INFO] - some numbers like DSP_STATE_INFO .[DEBUG_DSC_DISP_LV_INFO] - looks like DISP_BVD_INFO, but different numbers .[DEBUG_DSC_DISP_STROBE_INFO] - info about flash state [DEBUG_DSC_DISP_LENS_INFO] - same as DSP_STATE_INFO?
[DEBUG_DSC_DISP_CPU_STATE_INFO] - displays mode state, af state, exposure state, temperature and sw at bottom means pressed button code.
